Intel® Galileo Gen 2 Development Board
The Intel® Galileo Gen 2 development board is a microcontroller board based on the Intel® Quark™ SoC X1000 application processor, a 32-bit Intel® Pentium® brand system on a chip (SoC). It is the first board based on Intel® architecture designed to be hardware and software pin-compatible with shields designed for the Arduino Uno* R3.
This platform provides the ease of Intel architecture development through support for the Microsoft Windows*, Mac OS*, and Linux* host operating systems. It also brings the simplicity of the Arduino integrated development environment (IDE) software.
The Intel Galileo Gen 2 board is also software-compatible with the Arduino software development environment, which makes usability and introduction a snap. In addition to Arduino hardware and software compatibility, the Intel Galileo Gen 2 board has several PC industry standard I/O ports and features to expand native usage and capabilities beyond the Arduino shield ecosystem. A full-sized mini-PCI Express* slot, 100 Mb Ethernet port, Micro-SD slot, 6-pin 3.3V USB TTL UART header, USB host port, USB client port, and 8 Mbyte NOR Flash* come standard on the board.
Intel Galileo Gen 2 improves on Gen 1 by replacing the RS-232 console port with a 6-pin 3.3V USB TTL UART header. New additions to the Intel Galileo Gen 2 board include 12-bit pulse-width modulation (PWM), console UART1 redirection to Arduino* headers, 12V Power-over-Ethernet (PoE) capability, and a power regulation system that accepts power supplies from 7V to 15V.
The genuine Intel® processor and surrounding native I/O capabilities of the SoC provides for a fully featured offering for both the maker community and students alike. It will also be useful to professional developers who are looking for a simple and cost effective development environment to the more complex Intel® Atom™ processor and Intel® Core™ processor-based designs.
- 10 cm long and 7 cm wide with the USB connectors, UART jack, Ethernet connector, and power jack extending beyond the former dimension
- Four screw holes allow the board to be attached to a surface or case
- Reset button to reset the sketch and any attached shields
- Instruction set architecture (ISA)-compatible 32-bit Intel® Pentium® processor
- 16 Kbytes L1 cache
- 512 Kbytes of on-die embedded SRAM
- Simple to program: single thread, single core, constant speed
- ACPI-compatible CPU sleep states supported
- Integrated real-time clock (RTC) with optional 3V “coin cell” battery for operation between turn on cycles
- 400 MHz clock speed
- 8 Mbyte Legacy SPI Flash to store firmware (bootloader) and the latest sketch
- Between 256 Kbytes and 512 Kbytes dedicated for sketch storage
- 512 Kbytes embedded SRAM
- 256 Mbytes DRAM
- Optional micro SD card offers up to 32 Gbytes of storage
- USB storage works with any USB 2.0 compatible drive
- 11 Kbytes EEPROM programmed via the EEPROM library